CAMAVO AntyStick is an anti-adhesion agent that is applied to structural matrices to prevent them from sticking to concrete, putty and mineral and dispersion plasters when modelling the structure

Apply CAMAVO AntyStick evenly to the matrix using a brush or sprayer without creating puddles. During the modelling of the structure, control the quality of the imprinted texture and cycle the application of the preparation on the matrix as necessary. Applying too little release agent to the die can cause the material to stick to the die, which will affect the quality of the imprinted structure.

Work should be carried out at a temperature between +5°C and +25°C. Thoroughly ventilate (use extraction if necessary) the rooms in which you are working. Do not pour residues down the drain. Avoid inhaling vapours. Avoid contact with eyes and skin. Do not eat or smoke while working with the mixture. Wash hands after handling the product. In the event of contact with the skin, wash with soap and water. If the material comes into contact with your eyes, rinse them with plenty of water and seek medical advice.

Suitability for use: up to 24 months from date of manufacture. Store the product in a cool, dry, well-ventilated area.

Avoid direct sunlight, heat sources and strongly oxidising agents. Avoid leaks from the packaging to eliminate the risk of slipping on spilled product. This material can accumulate electrostatic charges that can cause an electrical discharge. Use proper electrical connection and earthing procedures.