dispersion paint

KLEIB Pure Nature is a modern dispersion paint for decorative painting of walls and ceilings indoors.

  • Good coverage, pure white
  • Resistant to dry rubbing
  • Vapor permeable
  • Extremely low odour emission
KLEIB farba dyspersyjna
10 l
pieces per pallet
average consumption
Download product sheet

KLEIB Pure Nature is a modern dispersion paint for decorative painting of walls and ceilings indoors. It performs very well on cement and lime plaster, concrete and gypsum substrates and gypsum board, etc., forming a durable non-yellowing coating that facilitates wall breathing. The paint has good coverage and purity of white and forms matt coatings with good vapor permeability. The paint is available in 24 colour variations in the KLEIB Nature paint mixing system.

The working surface should be clean, dry, compact, uniform, free of grease and dust. Scratches and deficiencies should be repaired and filled in. The paint is recommended to be applied on strong, compact substrates. The surfaces to be painted should be dusted off thoroughly and then washed with water. Walls painted with chalk-based paint and flaking working surfaces should be washed, then deep penetrating KLEIB G2 primer should be applied. We recommend priming plasterboards with KLEIB G1 before painting. It is particularly important to prime board joints and areas partially covered with gypsum mortar, as the use of KLEIB G1 primer equalizes the absorbency of the working surface and prevents streaks when painting. Note: it is recommended to apply paint from the same batch (date) of production to a given surface, under the same conditions and in the same fashion.

The paint is supplied ready to use. It may not be combined with other materials. After opening, mix thoroughly the contents of the bucket until a smooth uniform consistency is obtained.

The paint should be applied in two coats. When applying the first primer coat, KLEIB Pure Nature can be diluted up to 10% with water. Dyed paint should be applied undiluted. The paint should be applied at an air and working surface temperature of +5°C to +28°C. Subsequent coats are recommended to be applied after at least 3 hours. Paint plasters after 6 weeks of curing or after the time indicated by the manufacturer of a particular plaster, finishing plaster, putty. General wall paint technology should be maintained. We recommend using a microfiber paint roller or natural bristle roller with a minimum pile height of 12 mm.

The paint should be stored and transported in tightly closed tubs in dry conditions and plus temperatures from +5°C to +28°C, away from sources of heat. Protect from overheating. Note: water-based product. It is permanently damaged when temperatures fall below freezing. Do not leave containers open once they have been started. The compound shelf life is 24 months from the date on the packaging. The product is not classified as hazardous under the current ADR Agreement. Covered car transport required.