Protective and decorative roughcast texture rendering coat in the external thermal insulation composite system with rendering coats (ETICS), marketed under the trade name KLEIB. It can be used on any mineral and acrylic substrate which is adequately even and sound.

The working surface should be stable, firm, dry and even – without any damage or surface roughness, as such defects may be visible after applying the plaster. Surfaces should be primed using KLEIB C3, and when this has dried (no later than 72 hours) the plaster may be applied. KLEIB C5 can be applied on cement and cement-lime plasters after min. 14 days from their execution, while on concrete surfaces after min. 90 days from their execution. Note: It is recommended to render a given area using mortar that came from the same production series (date), under the same conditions and in the same fashion.

The plaster is supplied ready to use. The contents of each package should be mixed using a low speed electric drill until a smooth uniform consistency is obtained.

Apply the plaster with a stainless steel plasterer’s float to a thickness of a grain of aggregate. It should be trowelled smooth using a PVC float, the entire surface at the same time after the application, and always in the same fashion. It is recommended to carry out work on a given surface in one technological cycle (without any interruption). It must be performed within 72 hours of priming the surface. During application and drying of the plaster, protect the applied plaster from direct sunlight, rain and strong wind. KLEIB C5 plaster can be applied by means of airless spray. Tools should be washed with water immediately after use.

Up to 2.3-2.4 kg/m2 for the maximum grain size of 1.5 mm. Up to 2.8-3.0 kg/m2 for the maximum grain size of 2.0 mm

KLEIB C5 should be stored and transported in tightly closed tubs in dry conditions and plus temperatures, for up to 18 months from the production date on the packaging.