for bonding ceramic tiles - C1T

KLEIB KLM-95 is a cement-based adhesive for bonding wall and floor ceramic tiles (ceramic glazed tiles, terrazzo tiles, porcelain tiles), maximum dimensions: 33 x 33 cm, for interior and exterior use. KLEIB KLM-95 can be used on mineral substrates. KLEIB KLM-95 is also suitable for leveling and filling of surfaces by applying a 2-10 mm layer. In case of deformable or heavily loaded substrates use KLEIB EKL-110.

  • reduced slip
  • excellent adhesion
  • waterproof and frost resistant
25 kg
pieces per pallet
average consumption

1.5 kg/m² is used for each 1 mm of an adhesive layer thickness

Download product sheet

The adhesive is prepared by pouring dry mix into a container with a measured amount of water and mixing until a smooth, uniform consistency is obtained. The adhesive is ready to use after 5 minutes and after remixing. Prepared adhesive is to be used within approx. 3 hours.

Apply the adhesive on the prepared substrate with a smooth steel plasterer’s float, spread evenly and adjust. Lay a tile and press it firmly against the substrate. The amount of adhesive should be selected so that the adhesive contact surface is minimum 2/3 of the tile surface. In case of floor claddings the adhesive surface should be entirely covered with the product. The tile adjustment time is approximately 10 minutes. Flooring can be used or cladding can be grouted after minimum 24 hours.

On average 1.5 kg of mortar per 1 m² is used for each 1 mm of an adhesive layer thickness.

The adhesive must be transported and stored in tightly sealed bags, in dry conditions (preferably on pallets). The shelf life is 12 months from the manufacturing date on the packaging.

Warning: count(): Parameter must be an array or an object that implements Countable in /wordpress/wp-content/themes/kleibexport/single-produkty.php on line 216