HIGHLY FLEXIBLE, WHITE ADHESIVE MORTAR
for bonding large format boards of natural stone or porcelain tiles C2ES1
KLEIB EKL-120 is a white cement-based adhesive used primarily for bonding wall and floor cladding made of non-absorbent natural stone. It can also be used for bonding all types of wall and floor ceramic tiles, cement and terrazzo tiles, for interior and exterior use. KLEIB EKL-120 adhesive can be used on mineral substrates as well as plasterboards, waterproof plywood or OSBs. Recommended in particular for balconies, terraces, façades, underfloor and wall heating.
- excellent adhesion
- white mass reducing the risk of discolouration
- for balconies, terraces, façades, underfloor heating, over old tiles
- for natural stone cladding, all ceramic and porcelain tiles
- waterproof and frost resistant
The adhesive is prepared by pouring dry mix into a container with a measured amount of water and mixing until a smooth, uniform consistency is obtained. The adhesive is ready to use after 5 minutes and after remixing. Prepared adhesive is to be used within approx. 3 hours.
Apply the adhesive on the prepared substrate with a smooth steel plasterer’s float, spread evenly and adjust. Lay a tile and press it firmly against the substrate. The amount of adhesive should be selected so that the adhesive contact surface is minimum 2/3 of the tile surface. In case of floor claddings the adhesive surface should be entirely covered with the product. The tile adjustment time is approximately 10 minutes. Flooring can be used or cladding can be grouted after minimum 24 hours.
On average 1.5 kg of mortar per 1 m² is used for each 1 mm of an adhesive layer thickness.
The adhesive must be transported and stored in tightly sealed bags, in dry conditions (preferably on pallets). The shelf life is 12 months from the manufacturing date on the packaging.